"The HDI is like a country’s report card. In a single number, it tells policymakers and citizens how well a country is doing. The HDI has been wildly successful in changing the way people think about the development process. However, it still suffers from real flaws. First, it implicitly assumes trade-offs between its components. The HDI also struggles with the accuracy and meaningfulness of the underlying data. Finally, data on different domains may be highly correlated. The HLI looks at life expectancy at birth, but also takes the inequality in longevity into account. If two countries had the same life expectancy, the country with the higher rate of infant and child deaths would have a lower HLI."
Showing posts with label 3D. Show all posts
Showing posts with label 3D. Show all posts
08 January 2019
Human Life Indicator (HLI) ~ Alt-Index to HDI...
WEForum shares the Human Life Indicator (HLI) proposed by Sergei Scherbov, Simone Ghislandi, and Warren Sanderson as an alternative measure of development solving several problems of the Human Development Index (HDI)...
Labels:
3D,
Development,
Humanity,
Index,
Progress,
Visualization,
WEF,
Worldmap
03 July 2015
PopUp Factory ~ Formlabs et al at Solid 2015!
Cool to read about the PopUp Factory at Solid Conference 2015 and get a taste of mass customization meets groupwear...
Labels:
3D,
Automation,
Conference,
Customization,
Factory,
Manufacturing,
Media Lab,
Medium,
MIT,
PopUp,
Printing,
Solid
28 June 2015
Fairy Lights ~ Plasma Voxels Projection Display!
Check out Fairy Lights, a technique for projecting plasma voxels!
"We present a method of rendering aerial and volumetric graphics using femtosecond lasers. A high-intensity laser excites a physical matter to emit light at an arbitrary 3D position. Popular applications can then be explored especially since plasma induced by a femtosecond laser is safer than that generated by a nanosecond laser. There are two methods of rendering graphics with a femtosecond laser in air: Producing holograms using spatial light modulation technology, and scanning of a laser beam by a galvano mirror. The holograms and workspace of the system proposed here occupy a volume of up to 1 cm^3; however, this size is scalable depending on the optical devices and their setup. [...] Although we focus on laser-induced plasma in air, the discussion presented here is also applicable to other rendering principles such as fluorescence and microbubble in solid/liquid materials."
13 January 2015
Sprout ~ HP's 3D Interactive proto-Smartbulb...
Check out HP's new Sprout, their 3D interactive PC/workstation that's a first-stab (albeit third-rate) at a commercial smartbulb...
USAToday's Edward Baig reviews Sprout... This reminds me of the Calliope Never-ending Drawing Machine at MIT Media Lab... And also the MIT Media Lab LuminAR project... Of course, all of these are pre-dated by John Underkoffler's 1999 PhD on The I/O bulb and the luminous room!
14 August 2014
OwnPhones ~ Wireless Custom-Fit 3DP Earbuds
The DM's Victoria Woollaston reveals No more uncomfortable earphones! Custom-made buds are 3D printed to fit...
"Each OwnPhone is custom made to fit the wearer’s ear perfectly. People order the customised phones using a smartphone app. Images of a person’s ear are then turned into 3D-printed models. Colours, styles and materials in individual OwnPhones can be personalised."Kickstarting now...
21 June 2014
Printeer ~ 3DP Tools for Kids & Schools Kickin'
Our MIT Imaging & Fabrication Ventures class alumco Mission Street Manufacturing led by Brian Jaffe and team are now Kickstarting their Printeer!
"Unlike other 3D printers, using Printeer doesn't require advanced technical or engineering skills. For starters, you don't need to learn CAD (computer aided design) software, a professional-grade tool that is required to generate the 3D designs used by other 3D printers. Printeer design software is different in the following ways: (1) It runs on iPad, a platform most kids are more comfortable with than a PC. (2) It can be learned in about 30 seconds. (3) It doesn't require any intermediate steps between design and 3D printing. No PC, no complex software, no fancy configuration settings. Just touch the "print" button and watch it go."
10 June 2014
Form 1+ ~ Formlabs Improved Hi-Res 3DP...
MIT Media Lab 3DP spinoff Formlabs announces Form 1+. Not much flashy newness, but I like their video animatographics...
02 June 2014
Exponential Technologies ~ Towards Abundance...
UD spots Exponential Technologies leading to Abundance 360...
"Armed with exponential technologies like artificial intelligence, 3D printing and cloud computing, today's entrepreneurs are poised to create abundance. This Draw Shop video, originally created for entrepreneurs in Peter Diamandis' Abundance 360 coaching program, illustrates the powerful implications of six key technologies: 3D printing, robotics, artificial intelligence, the "Internet of Things," infinite computing and synthetic biology."
10 May 2014
Birdly ~ Oculus Rift VR Flight Simulator...
MIT's Jonas Brunschwig pointed me to Birdly...
28 March 2014
New Skull ~ 3DPrinted Replacement Braincase!
Wired's Nicholas Tufnell notes that Neurosurgeons successfully implant 3D printed skull at the UMC Utrecht hospital... "A 22-year-old woman from the Netherlands who suffers from a chronic bone disorder -- which has increased the thickness of her skull from 1.5cm to 5cm, causing reduced eyesight and severe headaches -- has had the top section of her skull removed and replaced with a 3D printed implant. The operation, which took 23 hours, was led by Dr Bon Verweij. The patient's skull was so thick, that had the operation not been performed, serious brain damage or death may have occurred in the near future. [...] The lead surgeon had previous experience with 3D reconstructions of skulls, but such a large implant had never been accomplished before. "It is almost impossible to see that she's ever had surgery," said Dr Verweij in the university's official statement. It is hoped this technique can also be used for patients with other bone disorders or to repair severely damaged skulls after an accident or tumour.
And here's UMC Utrecht's surgery video...
Labels:
3D,
Automation,
Epic,
Fab,
Health,
Netherlands,
Neurotechnology,
Robot,
Surgery,
Utrecht,
WIRED
14 March 2014
MX3D Printing ~ Laarman's Multi-Axis Metalics
24Oranges spots Joris Laarman showing large scale multi-axis 3D printing in metal!
25 January 2014
faBrickation ~ Legofy CAD Files for Fast 3DP...
Vice Motherboard spots faBrickation...
"A new approach to rapid prototyping of functional objects [and] save 3D printing time by automatically substituting sub-volumes with standard building blocks -- in our case Lego bricks. [Things marked] “high-resolution” [are] 3D printed [the rest are Legofied into] instructions that show users how to create everything else from Lego bricks."
01 January 2014
Acoustic Levitation ~ 3D Mid-Air Ultrasonic Lift!
io9's Annalee Newitz spots Acoustic Levitation...
"...whereby millimetre-sized particles were levitated and moved three-dimensionally by localised ultrasonic standing waves, which were generated by ultrasonic phased arrays. Our manipulation system has two original features. One is the direction of the ultrasound beam [...] The other is the manipulation principle."
Labels:
3D,
Acoustic,
Innovation,
io9,
Japan,
Levitation,
Research
24 December 2013
Spike ~ 3D Measuring & Modeling via Mobiles
NBF spots Spike, laser accurate 3D object and building measurement & modeling via mobile with clip-on. See Kickstarter campaign vid... Especially check out this quick'n'dirty 3D building modeling element! This reminds me of Mok3 crossed with Viztu with a touch of C3 Technologies;-)
20 November 2013
inFORM ~ Topomorphic Danceplay Media @ MIT!
Colleagues in MIT Media Lab Tangible Media inFORM with danceplay!
21 September 2013
Structure Sensor ~ Occipital's 3D Mobisense...
Thanks to Brad Feld for spotlighting Occipital's Structure Sensor on Kickstarter...
04 July 2013
Man vs Machine ~ Harken the End of Work?
PBS Newshour's Paul Solman explores Man vs Machine...
06 May 2013
3DP Liberator ~ First Successful Wiki Weapon...
DailyMail spots that Defense Distributed founder Cody Wilson has successfully fired The Liberator, the first entirely 3DPrinted gun (except for firing pin and bullet). Statist liberals are appalled and pandering politicians are already seeking to ban it. But the plans are online and the genie is now way out of the bottle... P.S. In a grotesque violation of freedom of speech and other essential elements of the US Constitution, Cody has been forced by the Feds to take down the designs.
05 March 2013
BrickItUp ~ 3D HouseCraft CAD on Kickstarter!
Our MIT Media Ventures alumnus Jose Luis Garcia del Castillo y Lopez has launched BrickItUp on Kickstarter!
"BrickItUp is an online platform for creation, navigation and sharing of 3D Worlds. As simple as that. It could be defined as an user-generated content sharing platform for 3D environments. Or an online real-time block construction engine. Or a crowdsourcing environment for 3D information. All of them apply. Want to suggest your own definition? We would love to hear it!"
Labels:
3D,
Alum,
Architecture,
Democracy,
Design,
Kickstarter,
Media,
MIT,
Participation
01 March 2013
4D Printing ~ 3DP plus Shape-Shifting Design...
Inhabitat spots Skylar Tibbits' 4D Printing: Cube Self-Folding Strand...
Subscribe to:
Posts (Atom)